Home > Cable Testing Machine >

Wet Proof Anti Interference High Frequency Spark Tester , Cable Testing Device

Product Categories

Dongguan Zhongli Instrument Technology Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Wet Proof Anti Interference High Frequency Spark Tester , Cable Testing Device

Brand Name : ZL

Model Number : ZL-1007

Certification : CE,ISO

Place of Origin : China

MOQ : 1 set

Price : Negotiable

Payment Terms : L/C, T/T, Western Union

Supply Ability : 60 Sets

Delivery Time : 5-8 work days

Packaging Details : High Frequency Spark Tester is packaged within wooden case.

Product name : Wet Proof andAnti Interference High Frequency Spark Tester

Cable Diameter : 0~25mm

Operation Temperature : +4~45°C

Operation Humidity : <90%RH

Signal Cable Lengths : 5M

Weight : Control Unit =5 kgs, Electrode = 8.5 kgs

Dimension Controller : 360(L)x485(W)x90(H) mm

Line Speed : 2000 M/min. maximum

Contact Now

Wet Proof Anti Interference High Frequency Spark Tester , Cable Testing Device

Specifications:

Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency: 2.5-3.5KHz normal. Fast recovery time after fault (0.1s)

The Sine Wave Spark Tester is a fast and reliable instrument used in distinguish wire faults and detecting bare wires. Its high-speed fault detection feature gives you prompt information without worsening the condition of the wire after the test.

The use of high frequency (3KHz) enables a traditional commercial power frequency bead chain electrode to be shortened to 120mm HS015E Model.

The Sine Wave Spark Tester is quality-assured to meet your needs.

Basic Function

Fast recovery time after fault (0.1 second).
Occupies short space in line and with improvement factor of 50 compared to
traditional CT power frequency electrode.
Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy +/- 1% of reading
Output Control: Front Panel Reset in Manual Mode. Closure time is selectable
0.2s/2s/5s in main board by jumper JP, Form C relay contacts (250VAC/5A) for all
wire faults detected.
Limits the fault current without damaging the test equipment.
Short exposure time to corona does not degrade nor damage good insulation.
Distinguishes all wire faults and detects bare wire.
Safety Switch interlock.

Basic Specification:

Specification	ZL-1007 High Frequency Spark Tester For Cable
Output Voltage	0.0~15.0KV R.M.S.
Test Voltage	1.0~15.0KV R.M.S.
Cable Diameter	0~25mm
Maximum Load Current	4mA Resistive,40mA Capacitive
Output Frequency	2.5-3.5KHznormal
Electrode lengths	Bead Chain 120mm
Fault Indication	Indicating lamp,Counting by Digital Counter
Output Control	1 Form C relay Contacts(220VAC/5A)for all wire faults and bare wire faults detected
Input Control	SP1, SP2 input interlock control
Operating Model	Extruder Continuous Application
Power Source	175~264 Volts, 180VA, Single phase, 50/60 Hz
Operation Temperature	+4~45°C
Operation Humidity	<90%RH
Signal Cable Lengths	5M
Weight	Control Unit =5 kgs, Electrode = 8.5 kgs
Dimension Controller	360(L)x485(W)x90(H) mm
Gauge Head	330(L)x200(W)x390(H)
Line Speed	2000 M/min. maximum*

*Follow UL 44, any point on the wire being traveled for not less than a total of 18 positive or negative crests of the supplied voltage.

Product Tags:

cable testing device

cable flex tester

Wet Proof Anti Interference High Frequency Spark Tester , Cable Testing Device Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Dongguan Zhongli Instrument Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!